home about sciencentral contact
sciencentral news : making sense of science
life sciences physical sciences technology full archive
spacebiotechnologyengineeringcomputersnanotechnology
April 7, 2013
ScienCentral

Gasoline From Trees


Post/Bookmark this story:

Search (Archive Only)
  Homegrown Fuel (7.25.06)

Biofuel Energy (7.10.06)

  Automobile Gasoline FAQ


   04.29.08
email to a friend
 
 

Scientists have found a way to convert wood fiber from trees into fuel for your car. As this ScienCentral News report explains, the surprisingly simple process might put biofuels in your car's tank without using the world's food supply.

[If you cannot see the youtube video below, you can click here for a hi-res mp4 video.]

Interviewee: George Huber, UMass-Amherst
Length: 1 min 27 sec
Produced by Jack Penland
Edited by Chris Bergendorff
Copyright © ScienCentral, Inc.
with additional footage courtesy Idaho National Engineering and Environmental Lab, Kansas State University, and the American Petroleum Institute.

Coming Full Circle

Not since the days of the steam engine has wood been generally used to fuel transportation. Dangerous pressurized boilers and engines billowing thick gritty smoke gave way to the relatively clean internal combustion engine powered by gasoline.

A hundred years later, a fuel hungry world could return to wood-powered transportation. But this time, if continued research proves successful, things will be different, because the wood will first be converted into gasoline.





University of Massachusetts-Amherst Assistant Professor George Huber and his team of researchers have been able to directly convert plant cellulose into a liquid that contains naphthalene and toluene, the compounds that make up about 25 percent of what's in gasoline today. The liquid could be blended to match today's fuels or used directly in gasoline engines on the road right now.





"Our process would basically make gasoline that looks like the gasoline in our tank today," says Huber. But by using trees, Huber and his team side step the growing conflict between using corn and soybeans to produce food versus using them to produce ethanol or biodiesel.




Huber says the process could work with any woody biomass, ranging from trees to switchgrass to the inedible portion of today's food crops. He says there is enough raw material in the United States to supply the energy equal to 60 percent of the nation's oil. The advantage of this process is that this fuel would not be a radical departure from fuels used today. Huber says, "Our goal is to make products that fit seamlessly into the existing infrastructure and to the existing markets."

He notes that biomass could create an oil barrel's worth of energy for between $10 and $30. With crude oil prices well over $100 per barrel, successful large-scale production would be good news for an energy hungry planet. But first, Huber says, "The challenge is to design an efficient process to take it and efficiently convert it to a liquid fuel."

Huber is enthusiastic about biofuels, noting, "The only source we have of a sustainable liquid fuel is plant biomass." He rejects as a "major myth" the idea that biofuel generation is driving food prices higher. He points to the current price of oil, noting, "It causes your fertilizer (prices) to go up. It causes your transportation costs to go up and that, in turn, cause food prices to go up."

Right now Huber and his team, graduate students Torren Carlson and Tushar Vispute, have created small test batches and are trying to improve that process before attempting any larger production. Writing in "Chemistry & Sustainability, Energy & Materials," the researchers explain how their process worked. They heat the cellulose to more than 1100 degrees Fahrenheit (600 degrees Celsius) in the presence of a catalyst. Catalysts speed reactions without actually being part of the reaction. Huber says the material then starts "thermally decomposing." The vapors from that thermal decomposition cool into the liquid that is the fuel.

"The whole beauty of this process is the simplicity," explains Huber. "One of the challenges in making a biofuel…is the ‘residence time' or the time your molecules spend in the reactor." Current biofuel plants have a "residence time" of five to ten days. Huber notes the "residence time" for this new process is "between two to 120 seconds." Huber says that means a production plant could be much smaller than current biofuel plants.

This research was published online in advance of print on April 2, 2008 by the journal "Chemistry & Sustainability, Energy & Materials" and was funded by the National Science Foundation.


 
       email to a friend by Jack Penland
               
     


Science Videos     Terms of Use     Privacy Policy     Site Map      Contact      About
 
ScienCentral News is a production of ScienCentral, Inc. in collaboration with The Center for Science and the Media 248 West 35th St., 17th Fl., NY, NY 10001 USA (212) 244-9577. The contents of these WWW sites © ScienCentral, 2000-2013. All rights reserved. This material is based on work supported by the National Science Foundation under Grant No. ESI-0515449 The views expressed in this website are not necessarily those of The National Science Foundation or any of our other sponsors. Image Credits National Science Foundation